MB-86N Pivot Door System
An entrance built around scale. An off-center vertical axis rather than side hinges, so an oversized leaf rotates through the opening instead of swinging from its edge.
Where a conventional door would limit the design.
Conventional hinges would dominate at this scale.
Concealed bearing-supported pivot hardware carries loads up to 500 kg, engineered for heavy door leaves. The off-center axis gives the door its characteristic rotation without the visual weight of side hinges.
Current ALUPROF system data.
Project-specific limits and performance depend on the selected construction and configuration.
Solid, glazed, or somewhere between.
Solid or glazed compositions, insulated panels, decorative milling, architectural pull handles, and options for LED detailing and electronic access-control integration.
For oversized entrances, early coordination matters. Finished floor conditions, drainage, handle placement, access control and the pivot axis should be resolved before fabrication.
Specify from the source documents.
ALUPROF’s own system leaflets, approvals and test reports for MB-86N Pivot.
Design your pivot entrance.
Send us the opening dimensions and desired leaf weight and we'll help configure the pivot axis and hardware.