Entry doors, built to the opening.
The front door is the one part of a building everybody touches and nobody forgets. We fabricate thermally broken aluminum entry doors in Brooklyn, any size, any finish, any glass, with the hardware chosen for the door rather than bundled with it.
Secure as standard
Multi-point locking engages the frame at several points top to bottom. The aluminum profile is considerably harder to force than a timber equivalent.
Thermally broken
An insulating barrier through the frame, so a large glazed entrance doesn’t become the coldest surface in the hallway.
Made to measure
Oversized, non-standard and out-of-square openings are the normal case, not a surcharge.
Single, double, and everything around it.
Single door
The standard entrance, in any width and height the opening allows.
Double / paired doors
For wider openings and grander entrances, with an active and passive leaf or two active leaves.
Sidelights and transoms
Fixed glazed panels beside or above the door, on the same profile and finish, so the whole assembly reads as one unit.
Full-glass entrances
Where the entrance should be as transparent as the glazing around it.
From solid to fully glazed.
Glass in an entry door does two jobs, light into the hallway, and a view of who's outside. How much you want of each is the decision that shapes the door.
A door that's slightly wrong is a door you notice every single day, the catch that needs a shove, the draught at the bottom, the gap you can see daylight through. Building it to the opening is the whole point.
Chosen per door, not bundled.
Handles, hinges, locks, closers and letterplates are specified for the door rather than supplied as a set. Finishes run to hundreds of RAL powder-coat colours and anodised options, and the inside can be a different colour to the outside if the hallway calls for it.
Who hangs it?
Your contractor. We build the door, pre-fit the hardware and deliver it ready to hang, with the detail your installer needs.
Entry door questions.
Yes, same profiles, same finish, same hardware family. Ordering them together is the only reliable way to get an exact match across the elevation.
Multi-point locking engages the frame top to bottom rather than at a single latch.
Up to a point, after which a pivot is the better mechanism, a pivot carries far more weight than hinges.
Most residential orders are fabricated in two to three weeks from approved measurements.
