New York
Yonkers
Custom aluminum windows for Yonkers buildings, from prewar brick walk-ups in Ludlow to new apartment blocks on the Hudson waterfront. Vitraz fabricates European window, door and curtain wall systems in Brooklyn and delivers them labelled by opening for your contractor to install.
Yonkers is built on hills that drop steeply to the Hudson. A window here has to handle wind and driving rain coming up the river, long cold winters, and openings in buildings that run from prewar masonry walk-ups to new mid-rise apartment blocks near the waterfront. A lot of the work is multifamily and mixed-use, where the window package is often the largest single item on the building envelope and has to arrive on schedule, floor by floor.
Vitraz is a window and door fabricator in Brooklyn. We build European aluminum systems on Aluprof profiles in our own shop and deliver them to Yonkers projects as part of our work across New York. We do not have a Yonkers office or crew. We fabricate and supply; your contractor or glazier installs.
Yonkers
What Yonkers buildings ask of a window
The building stock changes quickly as you move across the city. Downtown around Getty Square there are older commercial buildings, masonry loft structures and former factory buildings along the Saw Mill River corridor. Southwest Yonkers and Ludlow have blocks of prewar brick apartment buildings with tall, narrow openings. Neighborhoods like Nodine Hill and Lincoln Park mix wood-frame two- and three-family houses with small apartment buildings. Park Hill has large older homes on the ridge, and Crestwood and the northeast side have Tudor and Colonial houses on bigger lots.
What these buildings share is age. Masonry openings that have settled for a century are rarely square, and frame houses have been reworked many times over. We build every unit to the measured opening, not to a catalog size, so there is no packing out or trimming on site. Out-of-square openings are standard work for us, not an upcharge.
Talk to us
Have a Yonkers project in mind?
Send drawings, a photo of the opening, or just rough dimensions, we'll tell you which system fits and what it costs.
Yonkers
A commercial window manufacturer for Yonkers, NY developers and contractors
New construction along the waterfront and downtown has brought more mid-rise and high-rise apartment buildings, usually with retail or lobbies at street level. Along Central Park Avenue and other commercial corridors there is retail, office and mixed-use work. These jobs need window packages, storefront and entrance systems, and sometimes full curtain wall elevations.
For architects, developers and general contractors, our commercial window systems work runs the same way on every job:
- Shop drawings issued for architect approval before we cut anything
- Performance data and glazing build-ups stated with the quote, not later during submittals
- Phased delivery by floor, elevation or release, labelled by opening
- No installation bid and no glazing crew, so we never compete with your sub
To price a Yonkers multifamily or mixed-use project, send plans, elevations and a window schedule. We return a line-by-line quote with recommendations and performance figures.
Yonkers
Hudson exposure, hills and winters
Yonkers sits right on the river, and the hills put many buildings in open wind. West-facing elevations take weather straight off the Hudson, and upper floors on the ridges see more of it. Winters bring hard freezes and nor'easters; summers are hot and humid.
Every Vitraz system is thermally broken, with insulated glazing as standard and multi-point locking on every exterior unit. The locking pulls the sash tight against its gaskets at several points, which is what keeps wind-driven rain and drafts out. Triple glazing is available where the energy model or the exposure calls for it. For buildings near the Thruway, the Saw Mill Parkway or the Metro-North Hudson Line, acoustic laminated glass can be specified on the street-facing elevations only.
Yonkers is outside New York City, so Local Law 97 does not apply here. Projects are designed to New York State's energy code, and many multifamily owners also chase their own energy targets. We provide the system documentation your team needs for submittal.
Yonkers
Systems that suit Yonkers
Curtain wall and storefront
Our curtain wall systems use stick-built MB-SR50N, which handles irregular grids and phased delivery well. MB-SR50N IW hides the operable sash so the facade reads as one flat plane.
Tilt-and-turn apartment windows
MB-79N is the workhorse for most apartment work. The sash tilts in for secure ventilation or swings inward so tenants can clean the glass from inside on upper floors.
Exposed and larger openings
MB-86N suits river-facing and ridge-top elevations and bigger units. Its published system data lists design pressure up to ±60 psf, though real performance depends on size, glazing and configuration.
Passive House windows
MB-104 Passive starts at triple glazing with a deeper thermal break, for multifamily buildings and homes working toward demanding energy targets.
Steel-look windows
For mill and factory conversions, steel-look windows on MB Slimline keep the narrow black grid of the originals in thermally broken aluminum that does not rust or rattle.
Entry, pivot and lift-and-slide doors
Large entries for houses in Park Hill and Crestwood, and lift-and-slide doors for terraces and rear elevations that face the river.
Yonkers
How a Yonkers project runs from Brooklyn
The process starts with a survey and specification, either from your drawings or from measurements on site. We quote against a unit schedule, with the glazing and thermal performance of each opening stated. On commercial work, shop drawings go to the architect for approval before fabrication.
Everything is then cut, machined, assembled and glazed in our Brooklyn shop. Lead times are typically 2 to 6 weeks, sometimes as fast as 2 to 3 weeks, compared with 10 to 12 weeks or more for imported units. Because the shop is local, a revision takes days, not months.
Units arrive glazed, finished and labelled by opening, with the technical detail your installer needs. On larger jobs we sequence deliveries to match the schedule so the site is not storing a whole building's worth of windows. If you need an installer who knows these systems, we can refer one.
Yonkers
Custom homes and finishes
For custom and high-end residential work in Yonkers, windows, doors and louvered pergolas come off the same shop floor on the same profiles and finishes, so they match exactly when ordered together. Frames can be powder coated in a wide RAL range or anodised, and dual color is common: black or bronze outside to suit a brick or stone facade, white or warm grey inside. Hardware is chosen per opening, with concealed hinges for clean sightlines or surface hinges for a more traditional look. Glazed interior doors and partitions are also available for apartment and loft renovations where the windows belong to the building.
Yonkers
Start your Yonkers project with Vitraz
Send us your drawings, window schedule or photos of the openings and we will return a detailed quote with performance data. You can also call (917) 418-0816, Monday to Friday, 9am to 4pm, or request a quote online.
Questions we get about Yonkers projects
No. Every unit is fabricated in our own shop in Brooklyn and delivered to Yonkers, glazed and labelled by opening. Your contractor or glazier installs, and we can refer installers who know these systems.
No. Local Law 97 is a New York City law, and Yonkers is outside the city. Yonkers projects are designed to New York State's energy code, and many owners set their own energy targets. We include glazing build-ups and system performance data with the quote so your team has what it needs for submittal.
Yes. Older masonry openings are often out of square, so we build every unit to the measured opening rather than trimming a standard size. On occupied buildings we can phase delivery by floor or by line so your installer works through the building in order.
Usually. Send measurements and a straight-on photo of the full opening, and we can match the bar pattern in steel-look aluminum on the MB Slimline system. You keep the narrow grid of the originals without the rust, drafts and rattle.
What clients say
Verified reviews from homeowners, contractors and developers across the Northeast.
Related reading
Also nearby
We work across New York
The shop is in Brooklyn and everything is fabricated there, so the same systems, lead times and site support apply right across New York. Here are 7 more areas we cover in New York.
What we do in Yonkers
Every system is drawn, fabricated and finished for the opening it goes into, the same four services, wherever the project is.
Window Design & Fabrication
Residential aluminum windows
Explore this service →
Door Design & Fabrication
Entry, sliding, pivot & interior
Explore this service →
Commercial Window Systems
Windows, curtain wall & storefront
Explore this service →
Commercial Door Systems
Entrances & glazed partitions
Explore this service →Windows and doors for Yonkers
Every product and system below is drawn and fabricated in our Brooklyn shop.
Planning a project in Yonkers?
Send drawings or dimensions and we'll help identify the right system, or design one yourself first.