Patrick

Author

Patrick

Founder & Owner, Vitraz Windows & Doors

Patrick founded Vitraz and runs its Brooklyn fabrication shop. He builds European aluminum window and door systems to order rather than importing them finished, and works directly with the homeowners, architects, builders and developers who specify them. He writes here on the technical side of the trade: system selection, thermal and acoustic performance, glazing make-up, hardware, and what actually changes when a window is fabricated locally instead of shipped in.

26 articles

Articles by Patrick, page 1 of 3

Corner of a modern mid-rise building with a blue-tinted glass curtain wall facade set in a dark aluminum grid against an overcast sky
Commercial & Multi-Family

Stick curtain wall vs unitized: choosing a system for NYC mid-rise and mixed-use jobs

How stick-built and unitized curtain wall are fabricated and erected, what tight city sites do to crane plans and tolerances, and when a stick system like MB-SR50N is the right call for a mid-rise or mixed-use job.

November 16, 2026
Read more →
Row of brownstone townhouses with tall windows, a bay window, stoops and bare winter trees on a Brooklyn street
Performance & Energy

Energy efficient windows NYC: stop winter drafts and condensation before the cold sets in

Drafts, cold glass and wet sills all have specific causes. Here is what modern glazing and thermally broken frames change, and how to decide if replacement pays off before winter.

November 9, 2026
Read more →
Cluster of glass curtain wall high-rise towers in Manhattan with reflective blue and dark glazed facades and a mirrored corner building in the foreground
Commercial & Multi-Family

Curtain wall vs window wall for NYC mid-rise and high-rise buildings

How curtain wall and window wall are supported, what happens at the slab edge, and how cost and schedule shift between them on NYC ground-up and overclad projects.

November 2, 2026
Read more →
Urban rooftop terrace with wooden decking and glass railings overlooking city high-rises, with large glass sliding doors opening from an interior dining area onto the terrace at dusk
Doors

Lift and slide doors for NYC terraces and rear extensions: how they work, panel layouts, thresholds and drainage

A practical guide from our Brooklyn shop to lift and slide doors: how the mechanism seals, which panel layouts fit which openings, and how to get thresholds and drainage right on terraces and rear extensions.

October 19, 2026
Read more →
Replacing Windows in Historic Brownstones and Landmark Buildings in NYC
Replacement & Property Value

Replacing Windows in Historic Brownstones and Landmark Buildings in NYC

New York’s historic brownstones and landmark buildings are among the city’s most beloved architecture, prized for their character, craftsmanship, and connection to the past. Owning one is a privilege, but it also comes with responsibilities, and few tasks are as delicate as replacing the windows. Get it right and you preserve the building’s soul while […]

August 17, 2026
Read more →
Aluminum vs Vinyl vs Wood Windows: Choosing the Right Material for Your NYC Home
Choosing & Comparing

Aluminum vs Vinyl vs Wood Windows: Choosing the Right Material for Your NYC Home

When you set out to replace or install windows, one of the first and most consequential decisions is the frame material. It is easy to focus on glass, color, or style and treat the frame as an afterthought, but the material shapes almost everything that matters about a window, including how long it lasts, how […]

August 3, 2026
Read more →
Hurricane and Storm-Resistant Windows for Long Island’s Coastal Homes
Performance & Energy

Hurricane and Storm-Resistant Windows for Long Island’s Coastal Homes

Living near the water on Long Island comes with undeniable rewards and one serious responsibility. Coastal homes face the full force of nature, from nor’easters and high winds to the threat of hurricanes that track up the Eastern Seaboard. When a major storm hits, the windows and doors are often the first line of defense, […]

July 20, 2026
Read more →
Passive House Windows in New York: Meeting the Strictest Energy Standards
Performance & Energy

Passive House Windows in New York: Meeting the Strictest Energy Standards

Energy standards in New York are getting tougher, and the Passive House movement is leading the way. Whether you are an architect designing a high-performance building, a developer chasing certification, or a homeowner who wants the most efficient home possible, the windows you choose will make or break your results. Glazing is one of the […]

July 6, 2026
Read more →
How Tilt and Turn Windows Help Norwalk Buildings Meet Energy Efficiency Goals
Tilt & Turn

How Tilt and Turn Windows Help Norwalk Buildings Meet Energy Efficiency Goals

Energy-efficient windows Norwalk CT are no longer just a preference.

June 15, 2026
Read more →
Are Tilt and Turn Windows Worth It for Stamford Commercial Projects?
Tilt & Turn

Are Tilt and Turn Windows Worth It for Stamford Commercial Projects?

Tilt and turn windows cost Stamford CT is one of the most common questions developers, contractors, and property owners ask when planning a commercial project.

June 1, 2026
Read more →